Twice Tested, The New Toyota Supra Makes More Horsepower Than Listed

Two magazines put two 2020 Toyota Supras on two dynos in two parts of the country on two different days. Both magazines came to the same result: Toyota underrated the power figures of the particular Supras being tested.

In May, Car and Driver strapped a Supra to an all-wheel drive Dynojet dynamometer in Livernois, Michigan. CD‘s figures came to 339 horsepower and 427 lb-ft of torque at the wheels. After that, Motor Trend strapped a Supra to a Mustang eddy-current chassis dynamometer in Torrance, California. MT‘s weather-corrected numbers came to 332 hp and 387 lb-ft.

Using MT‘s tallies and parasitic losses of 10 percent, the Supra in question was putting out more like 364 hp and 426 lb-ft at the crank. At 15 percent loss, the numbers suggest 390 hp and 445 lb-ft. Those numbers don’t line up with the higher-powered incarnation of the B58 engine in the Z4 M40i, either, officially classified at 380 hp and 369 lb-ft.

Between car, region, weather, tester, and dyno variations, it’s useless to directly compare numbers worked up by C/D and MT. The point is that two data points arrived at independently found noteworthy power surpluses compared to Supra brochure numbers.

Neither story tries to assign a reason for the difference. C/D, and the Internet, say BMW is known for understating outputs. When C/D put the current M5 Competition on the same Dynojet used to test the Supra, the readout showed 617 hp and 606 lb-ft at the wheels for a sedan officially rated at 617 hp and 553 lb-ft. MT said its press loaner was like an “early build preproduction car,” perhaps with a “partially hand-built engine” and without the latest calibration.

Check out both articles for more details on the testing, and videos. Not that it matters for the moment, though; the real test will be to see whether customer cars get extra oomph, too.